Any USB-C cable works to charge the switch, as long as it has the same or higher voltage as the brick. If you want to dock you switch you will need the brick, but as others have stated, with an aftermarket dock you can use some other USB-C cable. (Like the cable that comes with the Pro Controller) But I cannot stress this enough.
Sync to an Xbox 360: Press Wireless Connect on the Xbox 360, then press Sync on the controller. PC: Plug a wired controller into an open USB port. For wireless, use a wireless receiver. Mac: Plug in a wireless receiver, download Xbox 360 receiver driver, press and hold Guide, press Sync on the receiver and controller.
Setup step 1: Connect power and TV. Connect the power cable into the power cable port on the console (marked by a single raised dot). Plug the power cable into a power outlet. Connect the HDMI cable into the HDMI port on the console (marked by a single raised dash). Connect the other end of the HDMI cable into your TV. Connect your controller to your device using a USB-C cable (or USB to micro-USB cable for Xbox One controllers). If the controller works properly with a cable connection, continue to the next step. If the controller doesn't work when connected with a USB cable, double check that the problem isn't with the cable or the port—try a differentAny regular USB C cable will work just fine and be cheaper. There is no official cable. Just use an Anker cable, they are the best, and last a long long long time. Just make sure you get the correct one, there are many variations and sizes. You will want the ten-foot one.I was using type c fast data cable x4c to play on pc , I plug it into any USB port , and it was working fine but after I updated my bios The usb cable was not working properly then I plug it into USB 3.1 port ( the blue one ) and it started to work again :D I think the bios update made useless the old usb port( 2.1) for DS Btw I use DS to play
Test the cable. Check whether the cable is attached securely at both ends. Try a different cable. Sometimes a cable can develop a short, or it might be susceptible to interference. The Xbox One Play & Charge Kit uses a standard USB to micro-USB cable. You can use any USB to micro-USB cable to test whether the cable is the problem.
Contrary to what some have said, a USB C cable only supporting USB 2.0 will be enough. The front USB port on the new Xbox Series X/S is only USB 2.0 and plugging a USB C 2.0 cable into the new controller works just fine. But if you wanna use the cable for other things too that need higher bandwidth, go ahead and buy a USB C at USB 3.1 speeds.21,740. Mar 12, 2017. Solution. #3. as far as I know, xbox360 controllers come in two flavors. Xbox360 (round connector) Xbox360 for windows (same round connector, includes USB adapter) First one, you need adapter, second, you should get it with controller, depending which the seller is selling. "An Xbox One wireless controller can be converted into a wired controller by connecting it to your console with any micro-USB cable. While wired, the controller does not need batteries to run, and will not drain any batteries in the controller. If you have the Play and Charge kit, the battery will charge." Testing conducted by Microsoft using standard AA batteries in preproduction units. Button mapping available via Xbox Accessories app for Xbox Series X|S, Xbox One, and Windows 10/11; app for Windows 10/11 requires compatible USB-C cable (sold separately). **Prices and availability may vary by retailer. XFRm.
can i use any usb c cable for xbox controller
